Services - Procedure
When we receive an item from someone to blast, we look it
over for dents and weak points, rust, special instructions
from the customer. If the item needs a handle, cap, etc.
masked off, we do so then. All manufacture tags, marking on
seals, price tags have to be removed. We put it in the
blaster, always blasting the underside, or bottom first to
see how it will react to the beads and pressure.
Some items need to be blasted at high pressure, while some
of the more expensive pieces or thin metals need to be
blasted at low pressure. When blasting has been complete, we
check the item over for any missed spots and wipe clean of
dust and beads which may stick. When clean, we spray our
self-etch primer on underside first, dry and then apply to
top of piece. We double check the item for full coverage,
respraying if needed. We let stand for 2 days approx. to
allow the primer to age. Then we pack in bubblewrap and
return to customer.
Cost for preparation varies depending on the surface and its
condition. Pieces that are clean and free from rust will
take less time than a piece that is painted, or has evidence
of rust. Please consider the condition of your painting
surface. On occasion, to remove the rust from the surface,
the bead blasting can break through metal, and we cannot be
responsible for damage.
The Best part of this process is the hunt for your next
family heirloom!! Never look at any thing for what it looks
like now, but what it can look like after you and I are
finished with it. Look at the shape, the angle, the detail,
and the size, what it can be! Do you have an old family
heirloom you are tired of polishing? Let me blast it for
you, and you can make it a new family heirloom! With the
steps we use in blasting and prepping your painting
surfaces, you will have a beautiful and durable base to
start your project.
Procedure: Please use
the downloadable forms at the bottom of this page. Please
keep a copy for your records. Please note any
special instructions. If the piece has a small dent, or
dimple, please note if you would like us to repair, if
possible. The inside of a surface, such as a coffee pot or
sugar. is easy to blast, but difficult to paint. If left
like is, you can still use it for serving. If you do not
wish to have the handle, or other parts on your piece
prepped, they should be taped off well with masking tape.
Shipping, Items need to be dry before shipping. They will be
wrapped properly and returned to you.
Shipping will be regular Postal Service or ground DHL,
unless otherwise specified. Please allow 2 to 4 weeks for
receiving, blasting, prepping and returning pieces. Please
let us know if you require a shorter time frame on a special
project.
Debbie Carrel l
Downloadable forms:
PDF
Word Doc |
